Overhaul Parts Capped Cost Program

PW118/A/B / PW119B/C / PW120/A / PW121/A / PW124B / PW125B / PW126/A

PRICE (all figures in USD)

  • Basic Turbomachine module overhaul PW118s – start at $748,000
  • Basic Turbomachine module overhaul PW119s – start at $910,000
  • Basic Turbomachine module overhaul PW120s – start at $796,000
  • Basic Turbomachine module overhaul PW121s – start at $796,000
  • Basic Turbomachine module overhaul PW124s – start at $896,000
  • Basic Turbomachine module overhaul PW125s – start at $876,000
  • Basic Turbomachine module overhaul PW126s – start at $876,000

Included in This Offer:

  • Category 1 – 6 Service Bulletins
  • No extra charges for foreign object damage (FOD) provided it did not cause an unscheduled removal
  • No extra charges for typical corrosion, sulphidation, and non-genuine P&WC parts
  • Engine OEM shop warranty
  • Basic turbomachine ONLY overhaul parts CAP credit of $75,000

New Life Limited Parts (LLP) Option:

Option to exchange LLP parts with new parts at additional cost when impellers have less than 10,000 cycles and discs and covers have less than 7,500 cycles, or less if sufficient to meet customer’s typical mission.

  • + $21,700 per impeller
  • + $3,000 interstage air seal
  • + $5,900 per cover
  • + $12,300 per HP, LP disc
  • + $12,600 per PT disc

Benefits:

  • Enhanced engine reliability and durability with an increased ratio of new parts
  • Extended time on wing leading to reduced operating costs
  • Reduces uncertainty, capping the cost of overhaul parts

Eligibility Requirements:

  • Engine owners/operators must request this program immediately after detail inspection and prior to sending any parts out for repair. Some engines may be deemed beyond economical repair and incur additional charges.
  • Offer is available to PW100 engine owners/operators only.
  • The engine must have been operated in accordance with P&WC-approved documentation and authorities’ instructions for continued airworthiness and removed for scheduled reasons and not for a significant BUR.
  • Labor, accessories, shipping, packaging, bulk and non P&WC parts, test cell fees are quoted separately by your preferred P&WC designated service provider.
  • To be eligible for this program, engines with single HP vanes must be upgraded to triple vanes. The cost of triple vanes is $22,500 USD per unit.



Hot Section Parts Cap Cost Program 

PW118/A/B / PW119B/C / PW120/A / PW121/A / PW124B /PW125B / PW126/A


PRICE (all figures in USD)

         
  Applicable Models Basic HSI Parts Capped Cost*     
 
PT Pack Parts Capped Cost   
    
LLP Parts Capped Cost
 



  PW118  $355,000  $102,000
 $208,000
  PW118A/B
 $373,500  $102,000
 $208,000
  PW119
 $404,000  $110,000
 $208,000
  PW120/A
 $399,500  $108,000
 $208,000
  PW121/A
 $399,500  $108,000
 $208,000
  PW123/B/C/D/E
 $444,000  $110,000
 $208,000
  PW124B
 $410,500  $110,000
 $208,000
  PW125B
 $409,500  $110,000
 $208,000
  PW126
 $409,500  $110,000
 $208,000
  PW127/B/E/F
 $453,000  $120,000
 $208,000
         

Upgrade to Single HP vane engines to triple vanes +US$22,500
Upgrade or Exchange - POST SB21891 nozzles for PW127+US$ 24,000

Included in This Offer:

  • Basic Hot Section gas path parts such as blades, vanes,(except for single segment HP vanes) , shroud segments and gaskets/packings in hot section and if P&WC supplied only*
  • Includes fuel Nozzles (additional charge for Post SB21891 for PW127), Flow divider, main oil filter, thermocouples and ignitor plugs. Other accessories excluded.
  • Category 1- 6 SB’s

Benefits:

  • Enhanced reliability and durability with an increased ratio of new parts.
  • Extended time on wing leading to reduced operating costs.
  • Reduces uncertainty by capping the cost of your P&WC HSI parts.
  • Includes Category 1 through 6 SBs.
  • No extra charges for typical corrosion, sulphidation and non-genuine P&WC parts.
  • CAP cost options life-limited parts (LLP) and power turbine disc balancing assembly parts (PT Pack).
  • CAP cost option to repair the PT Pack only
  • Older single High Pressure Vanes upgraded to triple vanes.

Eligibility Requirements:

  • This offer is only available to Owners/Operators of applicable engines.
  • Engine was operated in accordance with P&WC approved recommendations and with P&WC’s instructions for continued airworthiness. The engine has also been removed for scheduled reasons and not for a BUR/UR. (IE: overtemps, overtorques, etc.)
  • No extra charges for typical corrosion / sulphidation / non-genuine P&WC parts.
  • This program does not allow for the installation of non-genuine P&WC parts and all repairs must be completed in accordance with approved P&WC instructions for continued airworthiness



LLP Parts Capped Cost

There may be additional charges. For complete details contact your sales representative. Contact your sales representative.